Congratulations on the official launch of Ningbo Zhongxiang electromechanical Co., Ltd!　

We all know that water must enter the machine first in the installation of the water purifier, that is, the water purifier should be connected to the tap water source, that is, the three-way ball valve of the water inlet should be installed. Today, water experts will share the installation method of three-way ball valve for water inlet of water purifier.　

Faucet is a kind of hardware product often used in life. We must pay attention to the methods for the use of faucet. If there is water leakage in the process of using faucet, it is also very common to solve it in time, so as not to affect the normal life and use of family members. What about the leakage of the faucet? How to use faucet correctly at ordinary times? Let's take a look at these problems.　

Manual exhaust valve: the exhaust valve is usually installed at the highest point of the system, mainly because the solubility of the air in the water will gradually reduce due to the rise of the water temperature, so the water will gradually separate the air in the operation of the floor heating system, gradually rise, and finally concentrate on the highest point of the system.　

As for the horizontal supply of air supply diffusers, it should be arranged symmetrically or in quincunx shape. The distance between the center of the diffusers and the side wall should not be less than 1000mm. When the circular or square diffusers are arranged, the length width ratio of the corresponding air supply range (area) should not be greater than 1:1.5.　

The clearance of rolling bearing is generally divided into original clearance, installation clearance and use clearance. The original clearance, also known as manufacturing clearance, is produced by the bearing manufacturer according to the requirements of national or industrial standards and different bearing types. The bearing clearance finally selected by the mechanism designer is also this clearance.　

The cylindrical roller and raceway are linear contact bearings. The load capacity is large, mainly bearing radial load. The friction between the rolling body and the retaining edge of the ferrule is small, which is suitable for high-speed rotation. According to whether the ferrule has a flange, it can be divided into Nu, NJ, NUP, N, NF and other single row cylindrical roller bearings, NNU, NN and other double row cylindrical roler bearings. The bearing is a separable structure of inner ring and outer ring.　

In the process of selling rolling bearings, many customers said that as long as the surface of rolling bearings is bright, the quality is good, which is wrong. The surface of rolling bearing should be dark bright, which is caused by whether the steel used for rolling bearing is up to the standard and the grinding process and cutting fluid used, among which the former two are the main ones.　

Overheating is the biggest culprit of bearing failure, mainly because bearing heating is generally an alarm signal of abnormal operation of the machine, and failure to deal with it as soon as possible will cause chain reaction such as damage to the machine. Common causes of bearing heating include: